Hard Dot Imaging Developer & Replenisher

FOR RAPID ACCESS DEVELOPING OF FILMS AND PAPERS IN REPLENISHMENT PROCESSORS

Hard Dot Developer was formulated to process emulsion enhanced products (HARD DOT) and give the same results as Kodak 2000 developer in a graphics environment. It also can be used to process rapid access products.

Hard Dot Developer is a premium single part developer for processing rapid access films and papers, color separations, pan masking, laser scanner, image setting, duplicating films and papers in replenished systems. Hard Dot works at significantly lower temperatures resulting in shorter warm up time and longer life. Good results will be achieved on phototypesetting films and papers giving excellent density and whiter backgrounds.

MIXING INSTRUCTIONS
Hard Dot Developer concentrate should be mixed at a dilution of 1 part concentrate to 2 parts water for emulsion enhanced processing; and for rapid access products, Hard Dot Developer should be diluted at a rate of 1 part concentrate to 4 parts water.

REPLENISHMENT RATES
Replenishment with a correctly mixed solution of Hard Dot Developer is at a rate of .25 mls. per square inch of material processed, or 1 tank turn over per week at a rate of approximately 1 gallon per day.

• Models: CHM-CLHDDRG, CHM-CLHDDR25G & CHM-CLHDDR5