RAD5 Developer & Replenisher (R85)

FOR RAPID ACCESS DEVELOPING OF FILMS AND PAPERS IN REPLENISHMENT PROCESSORS

RAD 5 Developer is a premium single part developer for processing rapid access films and papers, color separations, pan masking, laser scanner, duplicating films and papers in replenished systems. RAD 5 works at a significantly lower temperatures resulting in shorter warm up time and longer life. Good results will be achieved on phototypesetting films and papers giving excellent density and whiter backgrounds.

RAD 5 Developer can be used to process rapid access products and with emulsion enhanced (HARD DOT) products.

The concentrate is formulated so that both the developer and replenisher make over-replenishment impossible.

MIXING INSTRUCTIONS
RAD 5 Developer concentrate should be mixed at a dilution of 1part concentrate to 4 parts water for rapid access film processing; and for emulsion enhanced (HARD DOT) products, RAD 5 Developer should be diluted at a rate of 1 part concentrate to 2 parts water.
When processing paper the dilution is 1+7

REPLENISHMENT RATES
Replenisment with a correctly mixed solution of RAD 5 is at a rate of .25 ml per square inch of material processed.

• Models: CHM-CLRAD5G & CHM-CLRAD55