Nikken Laser Plate Cleaner

LASER PLATE CLEANER removes toner that has been dispersed by laser beam printer on the non-imaged area of laser direct plates.
LASER PLATE CLEANER washes away silicone oil, dirt and finger prints.

DIRECTIONS:

1. Evenly apply LASER PLATE CLEANER on plate surface. Be sure to use sufficient amount to get best results.
2. Wait 10 seconds after application.
3. With a sponge or cotton pad soaked with LASER PLATE CLEANER, gently wipe plate 2 or 3 times to remove excess liquid. Do not rub hard or you may destroy base or image of plate.
4. Rinse under water after checking the effects of toner scatter removal with a magnifying glass. If toner remains on non-image area, lightly rub off toner with a sponge or cotton pad soaked with LASER PLATE CLEANER. Be sure to rinse plate thoroughly with water.

ELT
Extended Lead Time.
Special Order - Non-Cancellable / Non-Returnable.