The Zoom Loupe 1020 is an epochal product to permit the stepless change of magnification for zooming operation. Composed of 8 lenses in 6 groups for zooming from 10x to 20x, the optical system of this loupe keeps sufficient brightness in each stage of magnification with the least optical aberration.

The black body, finished with aluminum precision machining similar to camera lenses, allows smooth zooming in and zooming out. The click stop helps selection of desired magnification from 10x, 12x, 14x, 16 x and 20x shown in a small window.

Before starting observation, move the adjustment ring at the bottom of the lens body to select the optimum magnification in accordance with the purpose of inspection. After this selection is completed, finally regulate the adjustment ring around the eyepiece so that the mounted scale will be visible clearly. The zooming mechanism changes magnification to allow for continuous observation.

2044/66LH
Light Holder for Zoom Loupe

An illuminating device to supply light on the item being observed.
It will make a clear examination with unnecessary light cut off and also it will help smooth the focusing and zooming operation by holding the illuminator in hand. Uses 2 x 1.5 volt batteries.

Pen Light USB HI
OPT-LPLLEDHIV

With xtra high intensity LED light (6000K) and luminous intensity regulation.
For Power: USB connection to laptop or cellphone adapter.

Click for full Tolerance of Metric Reticles chart

Magnifiers with reticles are not supplied with certification certificates.
Certification if required must be sent to a certification lab.
Buyer is responsible for the source and cost.

Replacement reticles are available, see below.

Currently 2066 has an extended delivery of 3-6 months.
We are not accepting orders or inquires.

• Models: OPT-P2066, OPT-P2044/66LH, OPT-LPLLEDHIV, OPT-PFBULB, OPT-P2066BASE, OPT-P2044/66RR, OPT-P2066RET & OPT-P2066RETW