Teco

TECO REWIND INSPECTION TABLE SPECIFICATION & DESCRIPTION OF OPTIONS
HOW TO SELECT THE PROPER REWIND TABLE TO MEET YOUR REQUIREMENTS
DETERMINE THE MAXIMUM ROLL SIZE, WEB WIDTH AND TOTAL ROLL WEIGHT OF THE ROOLS YOU WILL BE REWINDING
SELECT THE MODEL THAT MEETS YOUR REQUIREMENTS FROM THE CHART BELOW

DESCRIPTION OF OPTIONS (REFER TO THE CHART ABOVE)

THRU BEAM OPTICAL LABEL SCANNER: PART #TX5 IS A SOLID STATE LIGHT BEAM AND AMPLIFIER ASSEMBLY THAT INTERFACES WITH THE REWINDER'S COUNTER AND IS DESIGNED TO ACCURATELY COUNT DIE CUT LABELS AT HIGH SPEEDS. A SPACE OUT OF AT LEAST 1/16" IS REQUIRED BETWEEN LABELS. THIS OPTION WILL INSURE A VERY ACCURATE LABEL COUNT IN EACH ROLL YOU SHIP TO YOUR CUSTOMER. NOTE: IF YOUR CUSTOMER IS USING THESE ROLLS IN A LABEL APPLICATOR MACHINE. THEN YOU SHOULD ADD OPTION #ML6.0 (MISSING LABEL DETECTOR) SO THAT YOU CAN SUPPLY ROLLS WITH NO OUT OF SEQUENCE LABELS.

BAR CODE VERIFIER: PART #BCV6 IS A SOLID STATE OPTICAL SCANNING DEVICE THAT CAN BE SET TO VARIOUS BAR CODE SYMBOLOGIES. AS IT SCANS THE WEB IT WILL DETECT AN ERROR IN THE PRINTED BAR CODE AND STOP THE REWINDING PROCESS. CONSULT THE FACTORY FOR APPLICATION INFORMATION AND COSTS.

REFLECTIVE OPTICAL LABEL SCANNER: PART #RX5 IS A SOLID STATE LIGHT BEAM AND AMPLIFIER SIMLAR TO ABOVE BUT IS DESIGNED TO COUNT BUTT CUT LABELS BY REFLECTING A LIGHT BEAM OFF THE FACE OF THE LABEL AND DETECT DIFFERENT LIGHT VALUES AS IT PASSES OVER THE LABEL.

LONG WEB PATH: PART #LWP12 THIS OPTION AFFORDS A 12 FOOT LONG WEB PATH WHICH IS NECESSARY WHEN APPLYING INK JET PRINTING, SECONDARY LABELS AND BAR CODE VERIFIERS. IT IS ALSO HELPFUL WHEN INSPECTING WITH A STROBE LIGHT.

COLOR DETECTING OPTICAL LABEL SCANNER: PART #CX5 IS A SOLID STATE LIGHT BEAM AND AMPLIFIER DESIGNED TO DETECT VARIOUS COLORS ON THE FACE OF THE LABEL. THE AMPLIFIER CAN BE SET TO DETECT ANY COLOR YOU SELECT.

INK JET PRINTING: TECO CAN OFFER SEVERAL DIFFERENT INK JET PRINTERS SYNCHRONIZED TO THE MOVING WEB. YOU CAN PRINT VARIABLE INFORMATION SUCH AS DATE CODES, BAR CODES AND SERIAL NUMBERS. CONSULT THE FACTORY FOR APPLICATION INFORMATION.

MISSING LABEL DETECTOR: PART #ML6.0 IS AN OPTICAL BEAM AND AMPLIFIER ALONG WITH A COUNTER INTERFACE JUNCTION BOX. WHEN IT DETECTS A MISSING LABEL OR LABELS A SIGNAL IS SENT TO THE COUNTER IMMEDIATELY SHUTS DOWN THE WINDING PROCESS. THIS GIVES THE TABLE OPERATOR A CHANCE TO REPLACE THE MISSING LABEL ON THE WEB. AFTER REPLACING THE LABEL, THE REWIND CAN BE CONTINUED BY PRESSING THE START SWITCH ON THE SPEED CONTROL. THE WINDING WILL CONTINUE UNTIL IT FINDS ANOTHER MISSING LABEL OR COMPLETES THE DISIRED LABEL COUNT.

SECONDARY LABEL APPLICATOR: APPLY COUPONS OR OTHER LABELS SYNCHRONIZED TO THE LABELS ON THE WEB ROLL. CONSULT THE FACTORY FOR MORE INFORMATION.

FOOT SPEED CONTROL: PART #F10K A VERY HELPFUL OPTION THAT PERMITS IMPROVED REWIND PRODUCTIVITY.

STROBE LIGHT: PART #S100 PROVIDES A BRIGHT, SYNCHRONIZED, HIGH SPEED FLASHING LIGHT. IT PERMITS VISUAL WEB INSPECTION AT HIGH SPEEDS. FREEZE FRAME.

Rewind Shaft End

Spring Blade Core Holder

Mechanical Leaf Core Holder