Microprocessor-based, real-time monitoring of fountain solution in continuous dampening units
Now you can instantly know your fountain solution temperature, pH and conductivity at a glance. Two probes connect to the monitors for constant digital readout.
- Two Single Pole Double Throw (SPDT) set point relays per monitor (pH and Conductivity) can be used to activate replenishment pumps, valves or alarms
- Three-point pH calibration; one point conductivity calibration
- Automatic temperature compensation (ATC)
- Probes may be used either in-line or submersed
- 1-year warranty
Complete kit includes pH and Conductivity monitors and probes for pH and Conductivity. All electrical and plumbing connections are the end user’s responsibility.
Conductivity Specifications
- Two set point, two SPDT relay operation
- Scrolling, 14-segment LED
- Reliable power supply from 85 to 250V AC/DC
- All push-button operation from the front panel
- Adjustable temperature coefficient and selectable cell constants
- Adjustable hysteresis band
- 4 to 20 mA transmitter/recorder output
- Selectable automatic or manual temperature compensation
- Two-level password protection
- Removable terminal strips
- Built-in memory back-up
- 6-Ranges: 0.00 to 20.00 μS, 0.0 to 200.0 μS, 0 to 2000 μS;
0.0 to 10.00 mS, 0.00 to 20.00 mS, 0.0 to 200.0 mS
- Resolution: 0.01 μS, 0.1 μS, 1 μS;
0.01 mS, 0.1 mS, 1.0 mS
- Accuracy ± 1% of full scale
- Dimensions 1.9" W x 3.8" H x 6" D
- Weight 2 lb.
pH Specifications
- Two set point, two SPDT relay operation
- Scrolling, 14-segment LED
- All push-button operation from the front panel
- Reliable power supply from 85 to 250 V AC/DC
- Symmetrical mode operation
- Adjustable hysteresis (dead band)
- Selectable automatic or manual temperature compensation
- Push-button calibration
- View previous calibration points
- Two-level password protection
- Removable terminal strips
- Built-in memory back-up
- 4 to 20 mA transmitter/recorder output
- pH range: pH 0.00 to 14.00
- Temperature range: 0°C to 110°C
- Resolution 0.01 pH, 0.1°C
- Accuracy ± 0.01 pH, ± 0.5°C
- Dimensions 1.9" W x 3.8" H x 6" D
- Weight 1.0 lb.
This is item is non-returnable, lead time is approximately 8 days
Manufacturer's design and specifications are subject to change without notice. Neither gwjcompany.com nor the manufacturer may be held responsible for design changes. The probes shown are representative of the type of probe that will be supplied and may differ in appearance from the actual product received.
