Core Cutter - CT10 Servo

Paper & Plastic core cutter

The CT10 Servo core cutter has all of the features of the CT10 Auto, with the added benefit of an upgraded servo driven indexing system. This, along with a fully programmable touch screen practically does the work for you. The servo replaces the need for the triggered end stop, giving you a tighter cut width tolerance of +/- 0.007". This machine is user friendly and includes a fully automated cutting cycle.

The operator pre-programs the cut widths on the touch screen, simplifying the task of getting various cut lengths from a single parent core. The specifications can be programmed with up to 10 different cut widths, 999 cuts per width and up to 50 jobs can be saved within those parameters. Once the parameters are set, the operator is ready to load a parent core. The operator engages the end of the core with the pull on chuck, at which point the machine will pull the core onto the mandrel. The operator then presses the motor start push button and moves the joystick to the "Auto" position. The machine will begin to advance and cut cores of the length that is selected in the run screen. The cores will continue to be cut until the entered count value is met or the parent core is used up. The operator will then load the next core and the machine will again take over the cutting process. Please see the CT11 for a fully automated system.

Features:

• Standard 60", 90" or 120" parent core length capability (Custom sizes are available)
• Accepts 1" – 11" internal diameter cores
• Accepts 3/4" maximum wall thickness
• Accurate +/-0.007" cut core width tolerance
• Less than a 5 minute core ID size conversion process
• Clean, square burr-free cuts
• Optional items include core support , automatic knife height sensing and servo driven plastic cutter
• 10" Allen Bradley touchscreen for entering all production requirements
• Job storage for up to 50 frequently run jobs